FSB – Single-Phase Hopper Loaders

SINGLE-PHASE HOPPER LOADERS

The single-phase FSB hopper loaders for the transport of plastic granules are a reliable and competitive solution to easily automate important areas of the production process. Equipped with an integrated suction unit and a sensor charge control, they guarantee the material requirement up to 200 Kg/h at a distance that can reach 20m.

Processes:
Category:
  • The construction is in stainless steel AISI 304 for all the parts in contact with the raw material.
  • The soundproof protection of the motor guarantees a noise contained in a threshold of 76db.
  • The 0.95 kW two-stage blower is controlled by a so-called “soft-start” function that reduces brush wear, lowers energy consumption and preserves engine life.
  • All units are fitted as standard with a high-density and resistant fabric filter with protective basket.
  • The filter cleaning is automatic and takes place through a decisive and controlled release of compressed air collected in a pre-accumulation tank.
  • The RS 485 serial output (modbus protocol) is standard and can be used to connect the unit to a proprietary or third-party supervision (4.0).
  • The exhaust valve is equipped with a gasket that ensures maximum air-tightness during the material intake phase and therefore maximum productivity.
  • The closure of the lid is made hermetic by an independent seal and removable during maintenance.
  • The control is equipped with setting and display of suction times.
  • Failure to charge is signaled by an alarm.
  • The wear of the motor brushes is previously reported to avoid unwanted faults.
  • The proportional valve control is integrated and allows the management of the cycles to reduce the stratifications during the material charge phase.
  • The proportional valve for the time-based dosing of two materials (for example a virgin and a regrind) is supplied separately and can be installed at any time without any additional cost.
  • An inspection port with fabric filter for venting is mounted at discharge height.
  • The hose and the suction probe are included.
Download Datasheet Request Info
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.